SELECTING NOZZLES FROM THIS CATALOG
Click on the sketch showing the type of nozzle you want from the previous page.
On the page that follows, go to the type you need in the left-hand column. Nozzles with integral lock rings are usually threaded 3/8-24, 1/2-24, 1/2-28, or 7/16-24.
Click on the thread size you want.
Select the part number in the column headed for the specific orifice size and material.
If you are unsure of the nozzle to order, send us a sample or sketch of the nozzle you are using, and we will quote price and delivery by return, or provide a part number, manufacturers name, applicator head used on, and orifice size and we will recommend the replacement.
You are always protected from an improper order because we encourage you to return, at no charge, any nozzles you have ordered in error within thirty days of shipment.
NOZZLES IN THIS CATALOG
THE NUMBER FOLLOWING THE BASE NUMBER AND THE DASH SPECIFIES THE ORIFICE SIZE IN INCHES
YOU CAN ORDER AN ORIFICE NOT LISTED
e.g 44803-009 is .009 orifice
|NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803|
|Copyright NOZZLETECH, INC. 1998 all rights reserved.|