MULTIPLE ORIFICE, INLINE PATTERN, MEDIUM LENGTH, DOMED NOZZLES:
Part number must be followed by orifice size desired, such as 80022-010. To specify angles not listed, use the basic part number shown, replacing the AA/BB/CC digits for the included angles desired. Following this, add a dash and orifice size. The basic number gives both the number of holes and the material.

NOZZLE TYPE AND DESCRIPTION AA/BB/CC S.S. P/N BRASS P/N
2 HOLE STAINLESS - 800AA-000
2 HOLE BRASS - 809AA-00
22 80022 80920
30 80030 80930
45 80045 80945
60 80060 80960
3 HOLE STAINLESS - 810AA-000
3 HOLE BRASS - 819AA-000
22 81022 81921
30 81030 81930
45 81045 81945
60 81060 81960
4 HOLE STAINLESS - 820AABB-000
4 HOLE BRASS - 829AABB-000
35/76 8203576 8293576
30/60 8203060 8293060
25/50 8202550 8292550
5 HOLE STAINLESS - 830AABB-000
5 HOLE BRASS - 839AABB-000
35/76 8303576 8393576
30/60 8303060 8393060
25/50 8302550 8392550
6 HOLE STAINLESS - 840AABBCC-000
6 HOLE BRASS - 849AABBCC-000
18/45/70 840184570 849184570
08/24/40 840082440 849082440


NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803
1-800-544-2969 1-407-839-1500
Fax 1-407-426-2025
Copyright NOZZLETECH, INC. 1998, 2004 all rights reserved.