MULTIPLE ORIFICE, INLINE PATTERN, SHORT LENGTH, DOMED NOZZLES:
Part number must be followed by orifice size desired, such as 70022-010. To specify angles not listed, use the basic part number shown, replacing the AA/BB/CC digits for the included angles desired. Following this, add a dash and orifice size. The basic number gives both the number of holes and the material.

NOZZLE TYPE AND DESCRIPTION AA/BB/CC S.S. P/N BRASS P/N
2 HOLE STAINLESS - 700AA-000
2 HOLE BRASS - 709AA-00
22 70022 70920
30 70030 70930
45 70045 70945
60 70060 70960
3 HOLE STAINLESS - 710AA-000
3 HOLE BRASS - 719AA-000
22 71022 71921
30 71030 71930
45 71045 71945
60 71060 71960
4 HOLE STAINLESS - 720AABB-000
4 HOLE BRASS - 729AABB-000
35/76 7203576 7293576
30/60 7203060 7293060
25/50 7202550 7292550
5 HOLE STAINLESS - 730AABB-000
5 HOLE BRASS - 739AABB-000
35/76 7303576 7393576
30/60 7303060 7393060
25/50 7302550 7392550
6 HOLE STAINLESS - 740AABBCC-000
6 HOLE BRASS - 749AABBCC-000
18/45/70 740184570 749184570
08/24/40 740082440 749082440


NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803
1-800-544-2969 1-407-839-1500
Fax 1-407-426-2025
Copyright NOZZLETECH, INC. 1998, 2004 all rights reserved.