MULTIPLE ORIFICE, INLINE PATTERN, MEDIUM LENGTH, SMALL BASE, DOMED NOZZLES:
Part number must be followed by orifice size desired, such as 90022-010. To specify angles not listed, use the basic part number shown, replacing the AA/BB/CC digits for the included angles desired. Following this, add a dash and orifice size. The basic number gives both the number of holes and the material.

NOZZLE TYPE AND DESCRIPTION AA/BB/CC S.S. P/N BRASS P/N
2 HOLE STAINLESS - 900AA-000
2 HOLE BRASS - 909AA-00
22 90022 90920
30 90030 90930
45 90045 90945
60 90060 90960
3 HOLE STAINLESS - 910AA-000
3 HOLE BRASS - 919AA-000
22 91022 91921
30 91030 91930
45 91045 91945
60 91060 91960
4 HOLE STAINLESS - 920AABB-000
4 HOLE BRASS - 929AABB-000
35/76 9203576 9293576
30/60 9203060 9293060
25/50 9202550 9292550
5 HOLE STAINLESS - 930AABB-000
5 HOLE BRASS - 939AABB-000
35/76 9303576 9393576
30/60 9303060 9393060
25/50 9302550 9392550
6 HOLE STAINLESS - 940AABBCC-000
6 HOLE BRASS - 949AABBCC-000
18/45/70 940184570 949184570
08/24/40 940082440 949082440


NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803
1-800-544-2969 1-407-839-1500
Fax 1-407-426-2025
Copyright NOZZLETECH, INC. 1998, 2004 all rights reserved.