MULTIPLE ORIFICE, RADIAL PATTERN, MEDIUM LENGTH, SMALL BASE, DOMED NOZZLES:
Part number must be followed by orifice size desired, such as 99010-012. To specify angles not listed, use the basic part number shown, replacing the "D" digits for the included angles desired. Following this, add a dash and the orifice size. The basic number gives both the number of holes and the material.

NOZZLE TYPE AND DESCRIPTION AA/BB/CC S.S. P/N BRASS P/N
ONE HOLE STAINLESS - 990DD-000
ONE HOLE BRASS - 999DD-00
10 99010 99910
22 99022 99922
30 99030 99930
40 99040 99940
3 HOLE STAINLESS - 950DD-000
3 HOLE BRASS - 959DD-000
10 95010 95910
22 95022 95922
30 95030 95930
40 95040 95940
4 HOLE STAINLESS - 960DD-000
4 HOLE BRASS - 969DD-00
10 96010 96910
22 96022 96922
30 96030 96930
40 96040 96940
5 HOLE STAINLESS - 970DD-000
5 HOLE BRASS - 979DD-000
10 97010 97910
22 97022 97922
30 97030 97930
40 97040 97940
6 HOLE STAINLESS - 980DD-000
6 HOLE BRASS - 989DD-00
10 98010 98910
22 98022 98922
30 98030 98930
40 98040 98940


NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803
1-800-544-2969 1-407-839-1500
Fax 1-407-426-2025
Copyright NOZZLETECH, INC. 1998, 2004 all rights reserved.